• If the project is planned on land owned by Hydro-Québec, the agreement will be in the form of a lease (market value rent).
  • If the project is planned on a servitude, the agreement will be in the form of a technical permission.

If the applicant is a third party, the applicant must also obtain authorization from the landowner and comply with all applicable laws and regulations, including all municipal by-laws.

Administrative fees

Administrative fees generally apply for any request that requires action by several Hydro-Québec representatives. The amount is indicated on the acknowledgment of receipt of the authorization request.

You must pay any applicable administrative, notary and land surveying fees as well as standard fees for this type of transaction.

Servitudes and property rights – Administrative fees

Authorization processing time

Authorization processing times vary on a case-by-case basis and according to Hydro-Québec’s priorities. It is best to provide all of the information required in order to avoid processing delays.

Points to consider when submitting an authorization request

  • Hydro-Québec rights-of-way have a very specific purpose: to operate power lines. Projects that involve the use of a right-of-way must therefore meet safety conditions, comply with the applicable transmission network standards and not hinder access to the electrical equipment.
  • Any proposed development (underground facilities, walking paths, bike paths, pools, etc.) must be designed to accommodate heavy equipment.
  • There must be an unobstructed work area around the electrical equipment. The size of the area depends on the voltage.
  • When the ground elevation is modified, there must be a slope to provide access to the work area.
  • Hydro-Québec may require the installation of mechanical protection such as concrete blocks or guardrails to protect its equipment.
  • Landscaping plans must include the names of the plant species and their locations. The plants may grow to a height of no more than 2.5 metres.
  • There must be a corridor at least 4 metres wide, ideally located under the conductors, to ensure Hydro-Québec’s inspection and maintenance teams can access the area and use heavy machinery.
  • You must provide the layout of the planned development and indicate the clearance heights between the ground and the electrical conductors. Hydro-Québec is not responsible for determining the height.
  • When building a fence, including one made of hedges and shrubs, there must be an opening of at least 4 metres to provide access to heavy machinery. Hydro-Québec may require that the fence be grounded.

Contractor’s obligations

Once the project is authorized and the agreement (permission or lease) is signed by the parties, the contractor overseeing the project must fill out the form “Intervention près des lignes électriques” as required by the Commission de la santé et sécurité au travail (CSST). The document indicates the line voltages and the approach distances that must be respected.

Form for work near a transmission line

Summary of obligations for work in a transmission line right-of-way

You must obtain authorization to carry out work in a transmission right-of-way.

Request regarding work, development or a servitude near transmission lines

The contractor overseeing the project must obtain the form “Intervention près des lignes électriques” as required by the Commission des normes, de l’équité, de la santé et de la sécurité au travail (CNESST).

Form for work near a transmission line