A huge wave of savings
A pool or spa can be responsible for approximately 70% of your summer electricity bill. Adopting the right pool and spa products as well as good habits will help you save.
Heat pump: the best water-heating option
If you’re planning to purchase a pool heater, choose a heat pump and save up to 75% on water heating costs. A heat pump is more expensive than an electric resistance heating system but the major energy savings will offset the higher price.
- For additional savings, lower the heat pump’s set temperature by two degrees.
- Install the heat pump in an area that gets plenty of air.
- Hire a master electrician to install your heat pump.
- Use a cover to protect the heat pump in winter.
Use a solar cover to lower your pool heating costs.
Use a solar cover and save up to 45% on your water heating costs.
Use a solar pool cover every day, especially overnight and even in warm weather.
Place the cover bubble-side down, in contact with the water.
Use a reel for easier handling.
Lower the temperature by just a degree or two to save approximately 25% on your water heating costs.
Choose an efficient pump and save!
If you’re planning to replace your pump or install a new pool, choose an efficient pump (a two-speed or variable-speed model) and save up to 80% on water filtration costs as compared to a single-speed pump.
Choose a model of two speed pump that automates the hours at which the pump operates on high and low speeds to facilitate use and maximize savings.
Choose an ENERGY STAR certified model.
Ask your pool retailer whether the pump is compatible with your setup (chlorinator, ionizer, ozonizer, heater, etc.).
When it comes time to install your variable-speed pump, call upon the services of an expert, who can give you personalized tips.
Install a timer to optimize the use of your pump.
Install a timer on the filter pump and save up to 45% on filtration costs without sacrificing water quality.
Choose a timer that is especially adapted to your pool (for at least a 1-HP motor) and rated 15 A.
If you choose an electronic timer, be sure it can store programming information in case of power failure.
Spa: proper use, lower consumption
A spa can have a considerable impact on your electricity bill and cost over $500/year. If you don’t plan on using your spa during the winter, remember to shut it off. You’ll save over $250.
Source : Hydro-Québec's Calculation Tools
To save, opt for the standby temperature when you’re not using your spa.
Put the cover back on after each use to retain heat.
Choose a spa with better insulation and two separate pumps, including an efficient model (with several speeds).
Choose a rigid, well-insulated cover to avoid wasting the energy required to heat the water.
Make sure your spa is protected from strong winds and the elements.
Did you know that using a spa just once a week is the equivalent of leaving a 55‑inch television on for 24 hours/day for a month?