|
|
 |
Products and services
Services
 |
 |
 |
Technical audits offer customers a detailed assessment of the condition of their electrical installations. The 21-point evaluation, covering technical, maintenance management and safety aspects, is conducted by an expert from Hydro-Québec TransÉnergie, who prepares a report that includes comments, an action plan and short- and medium-term improvement options. The annual follow-up process is optional.
For more information:
Normand St-Pierre
Chef Projets, Services spécialisés provinciaux, Hydro-Québec TransÉnergie
1780, boul. Lionel-Boulet, 2e étage
Varennes, Québec, J3X 1S1
Tél.: 450 652-8221
Fax: 450 652-8780
Email: st-pierre.normand@hydro.qc.ca
|
 |
 |
|
 |
 |
 |
 |
Oragelect is a real-time lightning detection and localization system. Oragelect can be used in both a preventive and a corrective way on transmission, distribution and telecommunications networks. Thanks to the real-time detection of lightning strikes, it's easy to follow the development of a thunderstorm, to foresee its impacts on the system and to take the appropriate action.
Oragelect data is also used for post-mortem event analysis and the budgeting of new equipment. The territory covered by the Oragelect system used by Hydro-Québec TransÉnergie is broad and includes Québec, the Maritime provinces, New England and Eastern Ontario.
For more information:
Normand St-Pierre
Chef Projets, Services spécialisés provinciaux, Hydro-Québec TransÉnergie
1780, boul. Lionel-Boulet, 2e étage
Varennes, Québec, J3X 1S1
Tél.: 450 652-8221
Fax: 450 652-8780
Email: st-pierre.normand@hydro.qc.ca
|
 |
 |
|
 |
 |
 |
 |
Hydro-Québec TransÉnergie can provide the skilled labor and equipment needed to
- install cables of any voltage, including standard and oil-filled cables set in conduits or cable racks, or simply buried;
- carry out high-voltage testing, oversheath testing and oversheath surge arrester testing, as well as overall assembly inspection;
- undertake all maintenance and repair work for installed cables;
- develop a customized maintenance program based on equipment type, condition and age;
- treat or regenerate cable oil or other insulation oils in order to extend service life;
- provide oil sampling services for cables, joints, terminations and oil reservoirs;
- ensure quick replacement of defective components following the failure of a cable, termination or joint.
For more information:
Normand St-Pierre
Chef Projets, Services spécialisés provinciaux, Hydro-Québec TransÉnergie
1780, boul. Lionel-Boulet, 2e étage
Varennes, Québec, J3X 1S1
Tél.: 450 652-8221
Fax: 450 652-8780
Email: st-pierre.normand@hydro.qc.ca
|
 |
 |
|
 |
 |
 |
 |
Live-line work consists of a series of operations allowing the installation or replacement of various pieces of electrical equipment without switching the power off. The objective is to reduce the number of service interruptions and maximize system operation and economic return, while improving the quality of customer service. These techniques can be customized to suit any power system, large or small.
Each project is tailored to the customer's specific requirements. Hydro-Québec TransÉnergie guarantees complete and efficient technology transfer so that customers will then be able to perform their own live-line work.
Methods and Courses
Hydro-Québec TransÉnergie has been sharing its know-how in live-line procedures with Canadian and foreign companies for over 50 years. This form of training provides a quick return on investment because it increases the stability of high- and medium-voltage systems, while maximizing customer satisfaction. Our experts teach various safe and effective live-line operations techniques through an extensive training program based on proven procedures.
For more information:
Normand St-Pierre
Chef Projets, Services spécialisés provinciaux, Hydro-Québec TransÉnergie
1780, boul. Lionel-Boulet, 2e étage
Varennes, Québec, J3X 1S1
Tél.: 450 652-8221
Fax: 450 652-8780
Email: st-pierre.normand@hydro.qc.ca
|
 |
 |
|
 |
 |
 |
 |
Hydro-Québec TransÉnergie offers its customers (large-power customers, independent power producers, manufacturers, engineering companies, contractors, etc.) safety training programs. The following sessions are available:
- Introduction to the Code de sécurité des travaux - Substations, lines and generating stations
- Introduction to induction phenomena
- Grounding practices - Substations and lines
- Manufacture, maintenance and storage of grounding devices
- Single-line diagrams
- Thermite welding
- Hoisting equipment
- Stick inspection
- Nodes and splices
- High-altitude work with structural displacement
- High-altitude work without structural displacement
- Protecting line workers from falls
- First aid - Rescue basic
- First aid - Steel structures
- First aid - Wood structures
- Wood pole cutting
- Working near live lines
- High-altitude first aid - Telecom towers
- New operators program
To help our customers manage the technical skills available in their workforce, Hydro-Québec TransÉnergie can provide them with a summary or history of training taken at Hydro-Québec. This will help them determine which of their employees may need particular training or refresher courses.
For more information:
Normand St-Pierre
Chef Projets, Services spécialisés provinciaux, Hydro-Québec TransÉnergie
1780, boul. Lionel-Boulet, 2e étage
Varennes, Québec, J3X 1S1
Tél.: 450 652-8221
Fax: 450 652-8780
Email: st-pierre.normand@hydro.qc.ca
|
 |
 |
|
 |
|